Tel : +86-13812850975 E-mail : info@winsoarst.com
 |
| Quantity: | |
|---|---|
SJ-35 / SJ-45 - ABS PLA
Product Description
Direct answer: This general-purpose ABS PLA filament machine is intended for buyers comparing a complete production setup rather than one isolated component. It can support common filament sizes and can be expanded after confirming material formulation, output, quality standard and packaging requirements.
The Winsoar ABS PLA filament production machine provides a complete process for turning thermoplastic pellets into printable filament. The equipment covers drying, melting and mixing, die forming, staged water cooling, online diameter inspection, servo haul-off and spool winding for consistent product handling.
ABS filament for durable and functional 3D printed components
PLA filament for prototypes, education and consumer printing
Private-label and contract filament production
Standard spool products and customized colors after testing
Prepare and dry the selected pellets according to the raw material supplier's moisture recommendation.
Melt, plasticize and homogenize the material in the single-screw extruder.
Form the filament through the selected die and establish the initial diameter.
Use staged cooling and sizing to control shrinkage, straightness and surface quality.
Measure diameter online and coordinate extrusion speed with haul-off speed.
Wind qualified filament onto spools with controlled tension for packing and shipment.
Complete pellet-to-spool process in one coordinated line
Single-screw extruder with controlled heating and plasticizing
Hot and cold water cooling for filament sizing and solidification
Online diameter inspection for production feedback
Servo haul-off and winding for stable traction and neat spools
Layout and equipment selection matched to the buyer's target product
For a complete ABS PLA production proposal, confirm material grade, diameter range, target output, tolerance, spool weight, packaging method, factory space and power standard.
For a complete multi-material configuration, see the 3D Printer Filament Production Line reference page.
Machine Configuration
The equipment is configured as a continuous filament process. The final screw, die, heating, cooling, laser, haul-off and winder selection depends on material, diameter, output, tolerance and spool requirements.
Main Technical Parameter
The following values are reference configurations for quotation. Final performance depends on material grade, formulation, die, process temperature, cooling conditions and quality standard.
| Item | SJ-35 | SJ-45 |
|---|---|---|
| Motor power | 5.5 kW | 15 kW |
| Reference output | 8-12 kg/h | 16-20 kg/h |
| Material | PLA, ABS and selected thermoplastic compounds | |
| Filament size | 1.75 mm, 2.85 mm and 3 mm, subject to die and process setup | |
| Diameter control | Online laser measurement; target tolerance confirmed against the buyer's standard | |
| Downstream | Servo haul-off, spool winding, inspection and export packing | |
For a complete ABS PLA production proposal, confirm material grade, diameter range, target output, tolerance, spool weight, packaging method, factory space and power standard. Confirm the required factory length, operator access, cooling utilities and local electrical standard before final equipment selection.
Factory, Packaging & Exhibition
Winsoar supports filament equipment projects from material and product specification review through assembly, checking, export packaging, container loading and customer communication. The support images below show the project workflow around plastic extrusion equipment.
The workshop supports equipment assembly, electrical checking and line layout preparation before shipment.
Mechanical components, electrical controls, dies and accessories are checked against the confirmed project configuration.
Packaging is selected according to equipment dimensions, transport distance and unloading conditions.
Loading is organized to protect long equipment sections and smaller precision parts during overseas transport.
Technical discussions help confirm material, target diameter, output, spool format and factory conditions.
Filament samples help compare surface quality, diameter, color, spool winding and printing requirements.
For a complete ABS PLA production proposal, confirm material grade, diameter range, target output, tolerance, spool weight, packaging method, factory space and power standard.
It is intended for general ABS and PLA filament manufacturing, including standard spool products, customized colors and private-label supply after the raw material grade, diameter and quality requirements are confirmed.
Yes, these are common target sizes when the matching die, cooling and process setup are selected. The final configuration should follow the buyer's required diameter tolerance and spool format.
Controlled extrusion, staged cooling, online diameter inspection, servo haul-off and constant-tension winding work together to reduce diameter fluctuation, stretching and irregular spool edges under suitable process conditions.
Please specify ABS or PLA grade, diameter, target output, tolerance, color-change frequency, spool weight, packing method, local power standard and available workshop space.
Related filament equipment: 3D Printer Filament Production Line | ABS/PLA 1.75mm Plastic Filament Extrusion Machine | ABS/PLA 3D Printer Filament Extrusion Machine. Compare the material scope, target diameter, output and downstream winding configuration before requesting a quotation.
