Tel : +86-13812850975 E-mail : info@winsoarst.com
Views: 0 Author: Site Editor Publish Time: 2026-07-16 Origin: Site
Watch the Winsoar 16-32mm PVC one out four pipe line running test, then review the recommended four-cavity layout for conduit, electrical pipe and small UPVC pipe production.
This solution is designed for small diameter PVC / UPVC pipe projects that need higher practical output from a compact one out four layout. It is commonly used for electrical conduit, building pipe and small UPVC pipe production where four-cavity forming, synchronized hauling and accurate cutting must work together.
For customers comparing small PVC conduit machines, this page connects the running video with the real machine sequence and the matching product page. It is useful when checking four-cavity mould layout, vacuum calibration, haul-off and cutting synchronization, mixer requirement and workshop space.
For accurate quotation, Winsoar can match the extruder, die head, vacuum calibration, cooling, haul-off, cutter and downstream receiving equipment according to pipe diameter, SDR, wall thickness, output target, voltage and workshop layout.
For small PVC electrical conduit production where stable diameter, smooth pipe surface and practical output are important.
A four-cavity layout improves production efficiency for selected 16-32mm pipe sizes while keeping the workshop footprint controlled.
Suitable for small UPVC building pipe projects with matched twin screw extrusion, vacuum calibration and synchronized cutting.
| Process | Main Equipment | Selection Point |
|---|---|---|
| Mixing | PVC hot and cold mixer | Prepares PVC resin, CaCO3, stabilizer and additives before extrusion. |
| Extrusion | Conical twin screw extruder | Selected according to PVC formula, target output and 16-32mm pipe range. |
| Pipe forming | Four-cavity PVC pipe mould | Matched with 16mm, 20mm, 25mm and 32mm PVC conduit or UPVC pipe requirements. |
| Sizing and cooling | Vacuum calibration tank | Controls pipe outside diameter, roundness and surface quality for four pipes at the same time. |
| Pulling and cutting | Haul-off machine and cutter | Synchronized traction and fixed-length cutting for one out four small PVC pipe production. |
| Receiving | Pipe stacker | Collects finished small PVC pipes after cutting according to target length and packing method. |
To prepare a suitable 16-32mm PVC / UPVC pipe extrusion line solution, send Winsoar the pipe diameter range, SDR or wall thickness, pipe application, material grade, target output, voltage, fixed pipe length or coil requirement and workshop layout.
For full technical parameters and product details, visit the 16-32mm PVC One Out Four Pipe Extrusion Line product page.
Share your pipe range, SDR, output target and layout. Winsoar will recommend a practical HDPVC pipe extrusion line configuration.
