Tel : +86-13812850975 E-mail : info@winsoarst.com
Views: 0 Author: Site Editor Publish Time: 2026-07-11 Origin: Site
Watch the Winsoar large diameter PE pipe line running test, then review the recommended layout for municipal water supply, drainage, gas and industrial HDPE pipe production.
This solution is designed for large diameter PE / HDPE pipe projects where extrusion stability, cooling length, haul-off force, cutting accuracy and downstream receiving must be planned as a complete system.
For large pipe investment, the video page helps customers understand the actual line sequence before checking detailed parameters. Winsoar can match extruder capacity, die head design, vacuum sizing, cooling length, planetary cutting and pipe receiving according to SDR, wall thickness and output target.
For accurate quotation, Winsoar can match the extruder, die head, vacuum calibration, cooling, haul-off, cutter and downstream receiving equipment according to pipe diameter, SDR, wall thickness, output target, voltage and workshop layout.
For PE100 / HDPE pressure pipe projects that need stable diameter, roundness and long cooling capacity.
Suitable for large diameter straight pipe production where cooling length and haul-off force affect real output.
Optional color marking can be configured, and the line layout can be planned around project pipe standards.
| Process | Main Equipment | Selection Point |
|---|---|---|
| Extrusion | High capacity single screw extruder | Selected by PE80/PE100 grade, SDR, wall thickness and required output. |
| Mark line | Optional color marking co-extruder | Used for gas, water or project identification stripes. |
| Pipe forming | Large diameter PE pipe die head | Matched with 315mm, 400mm, 630mm, 800mm and required SDR range. |
| Sizing and cooling | Vacuum calibration tank and multiple spray cooling tanks | Cooling length should be planned carefully for thick-wall HDPE pipe. |
| Pulling and cutting | Multi-caterpillar haul-off machine and planetary cutter | Designed for heavy pipe traction and stable fixed-length cutting. |
| Receiving | Pipe stacker or turnover rack | Kept as an independent downstream unit after cutting for safer large pipe handling. |
To prepare a suitable 315-800mm PE / HDPE pipe extrusion line solution, send Winsoar the pipe diameter range, SDR or wall thickness, pipe application, material grade, target output, voltage, fixed pipe length or coil requirement and workshop layout.
For full technical parameters and product details, visit the 315-800mm PE Pipe Production Line product page.
Share your pipe range, SDR, output target and layout. Winsoar will recommend a practical HDPE pipe extrusion line configuration.
