Tel : +86-13812850975 E-mail : info@winsoarst.com
Views: 0 Author: Site Editor Publish Time: 2026-07-11 Origin: Site
Watch the Winsoar small diameter PE pipe line running test, then review the recommended layout for water supply, gas, irrigation and coiled PE pipe production.
This solution is designed for buyers planning a small diameter PE / HDPE pipe extrusion project. The line focuses on stable extrusion, accurate vacuum sizing, smooth pipe surface, chipless cutting and optional coiling for smaller pipe sizes.
For customers comparing compact PE pipe machines, this page connects the running video with the real machine sequence and product specification. It is useful when checking whether the line should be configured for straight pipe, coiled pipe, irrigation pipe or gas pipe identification stripes.
For accurate quotation, Winsoar can match the extruder, die head, vacuum calibration, cooling, haul-off, cutter and downstream receiving equipment according to pipe diameter, SDR, wall thickness, output target, voltage and workshop layout.
For small diameter PE100 / HDPE water and irrigation pipe production with stable sizing and continuous output.
Optional color marking co-extrusion can be configured for gas pipe or project identification requirements.
A coiler can be matched for selected small pipe sizes when customers need coil packaging instead of fixed straight lengths.
| Process | Main Equipment | Selection Point |
|---|---|---|
| Extrusion | Single screw extruder | Selected by PE material grade, expected output and maximum 110mm pipe diameter. |
| Mark line | Optional color marking co-extruder | Used for gas, water or project identification stripes. |
| Pipe forming | PE pipe die head | Matched with 20mm, 63mm, 90mm, 110mm and required SDR range. |
| Sizing and cooling | Vacuum calibration tank and spray cooling tank | Cooling capacity should match wall thickness and line speed. |
| Pulling and cutting | Haul-off machine and chipless cutter | Designed for synchronized traction and clean fixed-length cutting. |
| Receiving | Optional coiler or stacker | Selected according to pipe size, pipe length and packaging method. |
To prepare a suitable 20-110mm PE / HDPE pipe extrusion line solution, send Winsoar the pipe diameter range, SDR or wall thickness, pipe application, material grade, target output, voltage, fixed pipe length or coil requirement and workshop layout.
For full technical parameters and product details, visit the 20-110mm PE Pipe Production Line product page.
Share your pipe range, SDR, output target and layout. Winsoar will recommend a practical HDPE pipe extrusion line configuration.
