WPC Window and Door Profile Extrusion Line

5 0 Reviews

Related WPC Profile Resources

This supporting page now bridges WPC window and door profile intent with the current Profile/Board cluster.

For quotation, prepare WPC formula, profile drawing, target width and thickness, surface finishing requirement, output target and workshop voltage.

PE WPC Decking Reference for Outdoor WPC Profiles

This supporting page is mainly for PVC/WPC window and door profile intent. If the project is outdoor decking made from PE resin and wood powder, compare the dedicated PE WPC decking machine page and process guide before confirming the extruder, mould, calibration, embossing and cutting configuration.

For quotation, prepare the decking board drawing, PE and wood powder formula, surface embossing or co-extrusion requirement, target output, finished board length, voltage and workshop layout.

PVC profile making machine mainly composed by Conical Twin Screw Extruder, Cooling Table, Hauling Machine, Cutting Machine, Stacker. With different mould, it can produce various UPVC profile, such as: PVC window door profile, PVC wall panel, PVC window sill board, cabinet door board, curtain box, PVC trucking, cable duct, PVC skirting, PVC protection corner and so on.

And by changing screw barrel and mould, it can also produce PVC based WPC products, such as: WPC wall panel, WPC window.

It can be used in hot or cold, dry or wet area, which can bear long period irradiation of ultraviolet radiation and bad weather such as gale and rainstorm, long life and easily to operate. And it also has the advantages of good fireproofing, high capacity, easy installation, low price and long using life.

Availability:

Quantity:



Inquire Add to Basket

Product Description

Related WPC Profile Resources

This supporting page now bridges WPC window and door profile intent with the current Profile/Board cluster.

For quotation, prepare WPC formula, profile drawing, target width and thickness, surface finishing requirement, output target and workshop voltage.

PVC profile making machine mainly composed by Conical Twin Screw Extruder, Cooling Table, Hauling Machine, Cutting Machine, Stacker. With different mould, it can produce various UPVC profile, such as: PVC window door profile, PVC wall panel, PVC window sill board, cabinet door board, curtain box, PVC trucking, cable duct, PVC skirting, PVC protection corner and so on.

And by changing screw barrel and mould, it can also produce PVC based WPC products, such as: WPC wall panel, WPC window.

It can be used in hot or cold, dry or wet area, which can bear long period irradiation of ultraviolet radiation and bad weather such as gale and rainstorm, long life and easily to operate. And it also has the advantages of good fireproofing, high capacity, easy installation, low price and long using life.

PE WPC Decking Reference for Outdoor WPC Profiles

This supporting page is mainly for PVC/WPC window and door profile intent. If the project is outdoor decking made from PE resin and wood powder, compare the dedicated PE WPC decking machine page and process guide before confirming the extruder, mould, calibration, embossing and cutting configuration.

For quotation, prepare the decking board drawing, PE and wood powder formula, surface embossing or co-extrusion requirement, target output, finished board length, voltage and workshop layout.

Key Components

CONICAL TWIN SCREW EXTRUDER

The extruder supports linkage speed regulation with upstream and downstream equipment, precise temperature control ensures raw material melting quality, and the overload alarm can be synchronously transmitted to the central control system.
VACUUM CALIBRATION TABLE

Used for shaping and cooling of pipes, it is equipped with a vacuum system, water circulation system, as well as front and rear moving device and left and right,height adjustment manual device,stainless steel box, circulating water spray cooling.
TRACTOR and CUTTING MACHINE

The tractor is used to continuously and automatically lead the cooled and hardened profiles from the machine head, and the speed is controlled by frequency conversion.

After being controlled by encoder according tothe required length, automatic cutting is carried out, the stacker is turned over with a delay, pipes are cutted smoothly without scraps and dust.

Features

1) Extruder screw and barrel with vacuum degassing system can get rid of the waste gas from the raw material which can ensure good quality of final granules.
2) Gearbox with nice outline, stable running, low noise and long service time.
3) Heating system: adopting cast aluminum heaters with stainless steel plate covers, wind fan cooling system, ensuring good features of cooling and heating, precision temperature controlling.
4) Driving system: adopting Siemens motor, using ABB inverter which provide stable torque output and various speed.
5) Vacuum calibrating and cooling Table: the table is made by #304 stainless steel, good strength and performance,long life time.
6) Traction machines:Rubber block traction belt,traction speed is adjustable by ABB frequency inverter.
7) Cutting machine: saw blade cutting,low noise,quick cutting performance,with dust collection device.

Main Parameter

Model	Profile Width	Extruder model	Motor power	Max.extrusion capacity	Calibrating platform length
WS-200	200mm	51/105	22kw	100-120kg/h	4000mm
WS-300	300mm	65/132	37kw	150-180kg/h	6000mm
WS-400	400mm	65/132	37kw	150-180kg/h	6000mm
WS-300	600mm	65/132	37kw	150-180kg/h	8000mm
WS-600	600mm	65/13 or 80/156	37 or 75kw	150-350kg/h	6000mm