You are here: Home / Products / Plastic Pipe Production Line / PE Pipe Production Line / 200-400mm HDPE Pipe Extrusion Line for Water and Gas Pipe

200-400mm High Speed HDPE Water Supply/gas Pipe Extrusion Production Line

Share to:

200-400mm HDPE Pipe Extrusion Line for Water and Gas Pipe

5 0 Reviews

200-400mm HDPE pipe extrusion line for water supply, gas pipe and pressure pipe projects. This older page supports long-tail inquiries and points buyers to the main Winsoar 200-400mm PE pipe production line for final configuration.

Availability:

Quantity:



Inquire Add to Basket

Product Description

200-400mm HDPE Pipe Extrusion Line for Water and Gas Pipe

Winsoar 200-400mm HDPE Pipe Extrusion Line for Water and Gas Pipe is maintained as a PE pipe extrusion support page for 200-400mm HDPE water and gas pipe inquiries. It is not the main PE category page; buyers should use the linked core PE pages below to confirm the final diameter range and configuration.

This page is useful for buyers comparing medium and large HDPE pressure pipe production. The newer 200-400mm PE pipe production line remains the main ranking and quotation page, while this page provides supporting application context.

Configuration Notes for This Application

A 200-400mm HDPE pipe line can include single screw extruder, spiral die head, vacuum calibration tank, spray cooling tank, caterpillar haul-off, chipless or planetary cutter and stacker. Water and gas pipe projects should confirm SDR range, cooling length and pipe roundness requirements.

If your project mainly covers 200-400mm pipe, review the linked core 200-400mm PE page first. For larger municipal pipe, compare the 315-800mm PE page as well.

Quotation Checklist

Please prepare pipe diameter range, SDR or wall thickness, raw material, application, output target, cutting or coiling requirement, voltage and available factory space. These details help Winsoar recommend the extruder, die head, vacuum calibration tank, cooling tank, haul-off, cutter and downstream equipment correctly.

Related PE Pipe Extrusion Resources

For the main product range, visit the PE Pipe Production Line category.

Useful guides: PE pipe line machine configuration, PE pipe production process, PE pipe line cost guide and HDPE pipe extrusion line selection guide. Video references: 200-400mm PE video solution, 315-800mm PE video solution.

Features

1. Adopt the single screw extruder, and mainly used in extruding PE, PP, ABS, PS, PC, and so on

2. The extruder using the special designed single screw making the product forming well.

3. Screw material: High quality alloy steel-38GrMoAlA, after high-temperature nitriding, nitriding deepth: 0.5-07mm, the surface hardness HV740-940.

4. Barrel temperature control though two section, the cast aluminum ring heater provide the hot temperature while the cooling fan with the help of air control the temperature zone.

5. The reduction box adopt the Germany technical which have long life span, low noise and lower hot.

6. The control panel: AC/DC motor ,SIEMENS contactor

Key Components

SINGLE SCREW EXTRUDER

The single screw extruder is simple in design and inexpensive, so it is widely used. It is suitable for extrusion production of PE, PPR, PERT plastic pipes, sheets and profiles.
MARK LINE CO-EXTRUDER

The extruder is especially widely used on pipe production line to co-extrude pipe mark line. It is specially designed with lower power consumption and takes smaller space.
EXTRUSION DIE

After compaction, melting, mixing and homogenization of PP the subsequent material is pushed to the die by the screw. The extrusion die is the most important part of tube forming.
VACUUM CALIBRATION TANK

Used for shaping and cooling of pipes, it is equipped with a vacuum system, water circulation system, as well as front and rear moving device and left and right, height adjustment manual device, stainless steel box, circulating water spray cooling.
SPRAY COOLING TANK

The cooling water is atomized and sprayed from the special nozzle after being pressed by the water pump, so that the product can be cool to 360 degrees in all directions.
TRACTOR

It is used to continuously and automatically lead out the cooled and hardened pipes from the machine head, and the speed is controlled by frequency conversion.
CUTTING MACHINE

After being controlled by encoder according to the required length, automatic cutting is carried out, the stacker is turned over with a delay, pipes are cutted smoothly without scraps and dust.
AUTOMATIC WINDING MACHINE

This machine is equipped with two reels alternately to ensure the continuity of production. It is suitable for plastic rewinding and packaging, automatic arranging,automatic rewinding, and easy operation.
TURNOVER RACK (OPTIONAL ON REQUEST)

Accept finished products and automatically turn over.

Main Technical Parameter

33D Series Classical Production Line：

Production Line	Diameter Range（mm）	Extruder Type	Max. Capacity （kg/h）	Max. Haul Off Speed（m/min）	Extrusion Power（kw）
WS-63 I	Ф 20-63	SJ65/33	220	12	55
WS-110 I	Ф 20-110	SJ65/33	220	12	55
WS-160 I	Ф 50-160	SJ75/33	400	10	110
WS-250 I	Ф 90-250	SJ90/33	400	6	110
WS-450 I	Ф 160-450	SJ120/33	500	4	160
WS-630 I	Ф 400-630	SJ120/33	850	2	280
WS-800 II	Ф 500-800	SJ120/33	850	2	280
WS-630 I	Ф 315-630	SJ120/33	850	2	355
WS-800 I	Ф 500-800	SJ150/33	1100	1	400

38D Series High Efficient Production Line：

Production Line	Diameter Range（mm)	Extruder Type	Max. Capacity （kg/h）	Max. Haul Off Speed（m/min）	Extrusion Power（kw）
WS-63Ⅱ	Ф 20-63	WSD60/38	320	30	70
WS-110Ⅱ	Ф 20-110	WSD60/38	380	20	90
WS-160Ⅱ	Ф 40-160	WSD60/38	460	15	110
WS-250Ⅱ	Ф 50-250	WSD75/38	600	12	160
WS-450Ⅱ	Ф 110-450	WSD90/38	850	8	250
WS-630Ⅱ	Ф 250-630	WSD90/38	1050	4	280
WS-800Ⅱ	Ф 500-800	WSD120/38	1300	2	355
WS-1200Ⅱ	Ф 710-1200	WSD75/38 WSD90/38	1450	1	160/250
WS-1600Ⅱ	Ф 1000-1600	WSD90/38 WSD90/38	1900	0.6	280/280