News

To determine the quality of PVC edge banding, you can evaluate it based on the following aspects: Read More

The core features of the PVC Dual Output Production Line lie in its ability to produce two tubes simultaneously with a single setup, significantly improving efficiency and reducing costs. Below is a detailed summary of its key characteristics:1. High-Efficiency Dual-Tube Synchronized Production D Read More

I. Differences in Raw Materials and Production Processes1. PVC Wood-Plastic ProfilesMain Raw Materials: Polyvinyl chloride (PVC) resin, wood fibers (or plant fibers such as bamboo fibers), fillers (e.g., calcium carbonate), and additives (stabilizers, lubricants, flame retardants, etc.).P Read More

Improper operation of hot and cold mixing units in plastic processing may affect product quality, equipment service life, and even cause safety hazards. The following key points should be noted during use:I. Preparation and Inspection Before StartupEquipment Status CheckCheck whether there are forei Read More

PET (polyethylene terephthalate), one of the most widely used plastics, is extensively applied in beverage bottles, food packaging, and other fields. With the increasing awareness of environmental protection, the recycling and regeneration of PET bottle flakes have formed a mature industrial chain. Read More

I. Analysis of Raw Material Characteristics (Premise for Equipment Selection)1. Characteristics of Agricultural Filmso Mainly composed of PE (predominantly low-density PE), containing large amounts of impurities: soil (30%-50%), pesticide residues, crop straw, metals (steel wires in mulch films Read More

Odor in recycled plastics is a key obstacle restricting their high-value applications, especially in fields sensitive to olfactory experience such as packaging and home furnishing. Odors mainly originate from residual impurities (e.g., ink, pesticides), polymer degradation products (e.g., small mole Read More

When planning to produce wood-plastic composites (WPC) profiles—such as decking, fencing, or wall panels—selecting the right plastic extruder is critical to ensuring product quality, production efficiency, and long-term profitability. Many manufacturers overlook key factors that can lead to issues l Read More

Even with the right extruder, WPC manufacturers often face production issues that affect product quality or efficiency. Below are 5 of the most common problems, their root causes, and step-by-step solutions—designed to help you minimize scrap and keep production running smoothly.1. Problem: WPC Prof Read More