You are here: Home / Products / Plastic Pipe Production Line / PE Pipe Production Line / 16-63mm PE PP Pipe Extrusion Line for Small Diameter Pipe

16-63mm PE/PP Pipe Extrusion Production Line

Share to:

16-63mm PE PP Pipe Extrusion Line for Small Diameter Pipe

5 0 Reviews

16-63mm PE PP pipe extrusion line for small diameter pipe, water pipe, irrigation pipe and coiled pipe applications. This older page supports long-tail searches and links to the main 16-63mm PE pipe production line.

Availability:

Quantity:



Inquire Add to Basket

Product Description

16-63mm PE PP Pipe Extrusion Line for Small Diameter Pipe

Winsoar 16-63mm PE PP Pipe Extrusion Line for Small Diameter Pipe is maintained as a PE pipe extrusion support page for 16-63mm small diameter PE and PP pipe inquiries. It is not the main PE category page; buyers should use the linked core PE pages below to confirm the final diameter range and configuration.

This page is a small-diameter PE/PP support page. The recently rebuilt 16-63mm PE pipe production line should remain the main ranking page for this diameter range.

Configuration Notes for This Application

A small PE pipe line can include single screw extruder, pipe die head, vacuum calibration, cooling tank, haul-off, chipless cutter and double-station coiler. Color marking and stable coiling are often important for 16-63mm PE pipe.

For final quotation, compare this page with the core 16-63mm PE product page and the 16-63mm PE video solution.

Quotation Checklist

Please prepare pipe diameter range, SDR or wall thickness, raw material, application, output target, cutting or coiling requirement, voltage and available factory space. These details help Winsoar recommend the extruder, die head, vacuum calibration tank, cooling tank, haul-off, cutter and downstream equipment correctly.

Related PE Pipe Extrusion Resources

For the main product range, visit the PE Pipe Production Line category.

Useful guides: PE pipe line machine configuration, PE pipe production process, PE pipe line cost guide and HDPE pipe extrusion line selection guide. Video references: 16-63mm PE video solution, 20-110mm PE video solution.

Key Components

SINGLE SCREW EXTRUDER

The single screw extruder is simple in design and inexpensive, so it is widely used. It is suitable for extrusion production of PE, PPR, PERT plastic pipes, sheets and profiles.
MARK LINE CO-EXTRUDER

The extruder is especially widely used on pipe production line to co-extrude pipe mark line. It is specially designed with lower power consumption and takes smaller space.
EXTRUSION DIE

After compaction, melting, mixing and homogenization of PP the subsequent material is pushed to the die by the screw. The extrusion die is the most important part of tube forming.
VACUUM CALIBRATION TANK

Used for shaping and cooling of pipes, it is equipped with a vacuum system, water circulation system, as well as front and rear moving device and left and right, height adjustment manual device, stainless steel box, circulating water spray cooling.
SPRAY COOLING TANK

The cooling water is atomized and sprayed from the special nozzle after being pressed by the water pump, so that the product can be cool to 360 degrees in all directions.
TRACTOR

It is used to continuously and automatically lead out the cooled and hardened pipes from the machine head, and the speed is controlled by frequency conversion.
CUTTING MACHINE

After being controlled by encoder according to the required length, automatic cutting is carried out, the stacker is turned over with a delay, pipes are cutted smoothly without scraps and dust.
AUTOMATIC WINDING MACHINE

This machine is equipped with two reels alternately to ensure the continuity of production. It is suitable for plastic rewinding and packaging, automatic arranging,automatic rewinding, and easy operation.
TURNOVER RACK (OPTIONAL ON REQUEST)

Accept finished products and automatically turn over.

Features

1. The optimum spiral structure feeding throat highly improves the output of extruder

2. Accurate temperature control system ensures materials melting performance

3. Unique screw design achieves better plasticizing and high quality products

4. Precisely designed gearbox with a high torsion guarantees stable running

5. "H" shape frame to decrease vibrating of extruder

6. Advanced PLC operation system realizes synchronization and automation

7. Adopt automatic water temperature & level control and special independent filters on both vacuum and cooling tanks

8. Offer stable haul-off unit with 2-12 caterpillars

9. Provide saw & chip-free cutting options

10. Low energy consumption, excellent performance, and easy maintenance

Main Technical Parameter

33D Series Classical Production Line：

Production Line	Diameter Range（mm）	Extruder Type	Max. Capacity （kg/h）	Max. Haul Off Speed（m/min）	Extrusion Power（kw）
WS-63 I	Ф 20-63	SJ65/33	220	12	55
WS-110 I	Ф 20-110	SJ65/33	220	12	55
WS-160 I	Ф 50-160	SJ75/33	400	10	110
WS-250 I	Ф 90-250	SJ90/33	400	6	110
WS-450 I	Ф 160-450	SJ120/33	500	4	160
WS-630 I	Ф 400-630	SJ120/33	850	2	280
WS-800 II	Ф 500-800	SJ120/33	850	2	280
WS-630 I	Ф 315-630	SJ120/33	850	2	355
WS-800 I	Ф 500-800	SJ150/33	1100	1	400

38D Series High Efficient Production Line：

Production Line	Diameter Range（mm)	Extruder Type	Max. Capacity （kg/h）	Max. Haul Off Speed（m/min）	Extrusion Power（kw）
WS-63Ⅱ	Ф 20-63	WSD60/38	320	30	70
WS-110Ⅱ	Ф 20-110	WSD60/38	380	20	90
WS-160Ⅱ	Ф 40-160	WSD60/38	460	15	110
WS-250Ⅱ	Ф 50-250	WSD75/38	600	12	160
WS-450Ⅱ	Ф 110-450	WSD90/38	850	8	250
WS-630Ⅱ	Ф 250-630	WSD90/38	1050	4	280
WS-800Ⅱ	Ф 500-800	WSD120/38	1300	2	355
WS-1200Ⅱ	Ф 710-1200	WSD75/38 WSD90/38	1450	1	160/250
WS-1600Ⅱ	Ф 1000-1600	WSD90/38 WSD90/38	1900	0.6	280/280