You are here: Home / Products / Plastic Pipe Production Line / PE Pipe Production Line / 110-315mm HDPE Pipe Making Machine for Irrigation and Water Supply

110-315mm HDPE/PP Irrigation/Water Pipe Making Extruder Machine

Share to:

110-315mm HDPE Pipe Making Machine for Irrigation and Water Supply

5 0 Reviews

110-315mm HDPE pipe making machine for irrigation, water supply and pressure pipe production. The line configuration can be matched to pipe diameter, SDR, output target, raw material and workshop layout.

Availability:

Quantity:



Inquire Add to Basket

Product Description

110-315mm HDPE Pipe Making Machine for Irrigation and Water Supply

Winsoar 110-315mm HDPE Pipe Making Machine for Irrigation and Water Supply is a supporting PE pipe extrusion page for buyers comparing medium diameter HDPE irrigation and water supply pipe projects. It helps confirm the practical pipe diameter range, application, extrusion configuration and quotation information before choosing a complete HDPE pipe production solution.

This page supports medium-diameter HDPE pipe project searches, especially irrigation and water supply applications. It helps buyers compare extruder output, die head size, cooling layout and downstream equipment before requesting a complete PE pipe line quotation.

Machine Configuration and Project Selection

The line normally includes single screw extruder, pipe die head, vacuum calibration tank, spray cooling tank, caterpillar haul-off, automatic cutter and stacker. For irrigation and pressure pipe, wall thickness stability, cooling efficiency and cutting accuracy should be checked carefully.

For standard medium-size water pipe projects, compare this support page with the 75-250mm and 200-400mm core PE pages. The final recommendation depends on the main diameter group, output target, pipe standard and available installation space.

Information Needed for Quotation

For a practical quotation, prepare pipe diameter, wall thickness or SDR, raw material type, pipe application, output target, cutting or coiling requirement, workshop voltage and available factory space. These details help Winsoar match the extruder, die head, vacuum calibration, cooling, haul-off, cutter and downstream equipment correctly.

110-315mm pipeHDPE pipeirrigationwater supplypressure pipemedium diameter

Related PE Pipe Extrusion Resources

This older PE product page is maintained as a supporting long-tail page. For the main product range, visit the PE Pipe Production Line category.

Useful guides: machines included in a PE pipe production line, PE pipe production line process, PE pipe production line cost and HDPE pipe extrusion line selection guide. Video references: 75-250mm PE video solution, 200-400mm PE video solution.

Key Components

SINGLE SCREW EXTRUDER

The single screw extruder is simple in design and inexpensive, so it is widely used. It is suitable for extrusion production of PE, PPR, PERT plastic pipes, sheets and profiles.
MARK LINE CO-EXTRUDER

The extruder is especially widely used on pipe production line to co-extrude pipe mark line. It is specially designed with lower power consumption and takes smaller space.
EXTRUSION DIE

After compaction, melting, mixing and homogenization of PP the subsequent material is pushed to the die by the screw. The extrusion die is the most important part of tube forming.
VACUUM CALIBRATION TANK

Used for shaping and cooling of pipes, it is equipped with a vacuum system, water circulation system, as well as front and rear moving device and left and right, height adjustment manual device, stainless steel box, circulating water spray cooling.
SPRAY COOLING TANK

The cooling water is atomized and sprayed from the special nozzle after being pressed by the water pump, so that the product can be cool to 360 degrees in all directions.
TRACTOR

It is used to continuously and automatically lead out the cooled and hardened pipes from the machine head, and the speed is controlled by frequency conversion.
CUTTING MACHINE

After being controlled by encoder according to the required length, automatic cutting is carried out, the stacker is turned over with a delay, pipes are cutted smoothly without scraps and dust.
AUTOMATIC WINDING MACHINE

This machine is equipped with two reels alternately to ensure the continuity of production. It is suitable for plastic rewinding and packaging, automatic arranging,automatic rewinding, and easy operation.
TURNOVER RACK (OPTIONAL ON REQUEST)

Accept finished products and automatically turn over.

Main Technical Parameter

33D Series Classical Production Line：

Production Line	Diameter Range（mm）	Extruder Type	Max. Capacity （kg/h）	Max. Haul Off Speed（m/min）	Extrusion Power（kw）
WS-63 I	Ф 20-63	SJ65/33	220	12	55
WS-110 I	Ф 20-110	SJ65/33	220	12	55
WS-160 I	Ф 50-160	SJ75/33	400	10	110
WS-250 I	Ф 90-250	SJ90/33	400	6	110
WS-450 I	Ф 160-450	SJ120/33	500	4	160
WS-630 I	Ф 400-630	SJ120/33	850	2	280
WS-800 II	Ф 500-800	SJ120/33	850	2	280
WS-630 I	Ф 315-630	SJ120/33	850	2	355
WS-800 I	Ф 500-800	SJ150/33	1100	1	400

38D Series High Efficient Production Line：

Production Line	Diameter Range（mm)	Extruder Type	Max. Capacity （kg/h）	Max. Haul Off Speed（m/min）	Extrusion Power（kw）
WS-63Ⅱ	Ф 20-63	WSD60/38	320	30	70
WS-110Ⅱ	Ф 20-110	WSD60/38	380	20	90
WS-160Ⅱ	Ф 40-160	WSD60/38	460	15	110
WS-250Ⅱ	Ф 50-250	WSD75/38	600	12	160
WS-450Ⅱ	Ф 110-450	WSD90/38	850	8	250
WS-630Ⅱ	Ф 250-630	WSD90/38	1050	4	280
WS-800Ⅱ	Ф 500-800	WSD120/38	1300	2	355
WS-1200Ⅱ	Ф 710-1200	WSD75/38 WSD90/38	1450	1	160/250
WS-1600Ⅱ	Ф 1000-1600	WSD90/38 WSD90/38	1900	0.6	280/280

FAQ

1、What kind of pipes is WS Pipe Making Extruder Machine mainly used for?

This machine is mainly used for the production of large diameter HDPE/MDPE gas and water pipes, which are characterized by heat resistance, ageing resistance and high mechanical strength.

2、What are the features of the high efficiency extruder of this machine?

The high efficiency extruder is designed for HDPE pipes and is equipped with a high speed and low noise gearbox, a feed section with a cooling unit and a reverse spiral groove, a wave screw with different pitches for high output, low melting point temperature and low energy consumption.